Live Sound Power Amps
Crowns XLS 1500 amplifier is a premiere portable PA system with unmatched performance, technology and affordability. It includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. This high-performance Crown power amp provides enormous power and flexibility thanks to the integrated DriveCore Technology, PureBand Crossover System and Peakx limiters. Weighing less than 12 pounds, its much easier to set up and move from show to show. A Crown Power Amp with Integrated DriveCore Technology Class D amplifiers are notable for...
[more info]The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4 TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWERs professional speaker connectors and...
[more info]The Phonic MAX 1000 Power Amplifier delivers 600 Watts of power at 8 ohms (bridge mono) , 300W of power at 4 ohms (stereo) - ideal for small- to medium-size venues like churches, auditoriums, and more. Input to the MAX 1000 is achieved via XLR or phone jack, and output is achieved through either Speakon-type connectors or binding posts. The MAX 1000 features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making it an affordable amplifier that is exceptional for real-world application.High-current toroidal transformers for greater power and low...
[more info]The B-52 US-1200 Power Amp has low noise, low distortion circuitry, and high current output stages. B-52 uses oversized toroidial transformers and large filter capacitors to deliver super-clean, fist-pumping output even when driving 2-ohm speaker loads. The stellar looking US-Series professional power amplifiers are made to outperform in any setting. B-52 US-series power amplifiers use the most reliable linear output devices, which provide ultralow distortion and ruler-flat frequency response. Backed by a 3-year warranty.Compact 2-rack sizeHigh-current toroidal transformers for greater 2-ohm...
[more info]The B-52 US-4000 Power Amplifier features low noise, low distortion circuitry and high current output stages. B-52 uses oversized toroidal transformers and large filter capacitors to deliver super clean, fist pumping output even when driving a 2-ohm speaker load. All B-52 US-series power amplifiers use the most reliable linear output devices to provide ultra-low distortion and ruler flat frequency response. The stellar looking B-52 US-Series professional power amplifiers are made to outperform in any setting. Backed by a 3-year warranty.Compact 2-rack sizeHigh-current toroidal transformers...
[more info]The rackmount EP4000 EUROPOWER power amp from Behringer delivers up to 2 x 2,000W at 2 ohms, 2 x 1400W at 4 ohms, and 4,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4 TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWERs professional speaker connectors and touch-proof...
[more info]Part of Peaveys IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields supremely high audio resolution and productivity.The Peavey IPR 3000 features 2 channels with independent, 100Hz crossovers and produces 440W per channel at 8, or 1,490W per channel at 2. Peaveys exclusive DDT speaker protection with multipoint clip sampling leads a...
[more info]Part of Peaveys IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields supremely high audio resolution and productivity.The Peavey IPR 3000 features 2 channels with independent, 100Hz crossovers and produces 440W per channel at 8, or 1,490W per channel at 2. Peaveys exclusive DDT speaker protection with multipoint clip sampling leads a...
[more info]Part of Peaveys IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields supremely high audio resolution and productivity.The Peavey IPR 3000 features 2 channels with independent, 100Hz crossovers and produces 440W per channel at 8, or 1,490W per channel at 2. Peaveys exclusive DDT speaker protection with multipoint clip sampling leads a...
[more info]Part of Peaveys IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields supremely high audio resolution and productivity.The Peavey IPR 3000 features 2 channels with independent, 100Hz crossovers and produces 440W per channel at 8, or 1,490W per channel at 2. Peaveys exclusive DDT speaker protection with multipoint clip sampling leads a...
[more info]The Peavey PV 1500 Power Amp features Peaveys patented DDT distortion detection technique that virtually eliminates distortion. It also features Peaveys patented V-cooling design, which cools the power transistors more evenly than traditional heat-sink designs. 2-rackspace chassis.
[more info]The Crown XLS 5000 power amp delivers 1800 watts per channel in four-ohm stereo mode, and a staggering 5000 watts in four-ohm bridge-mono mode. Housed in a rugged, 3U, all-steel chassis, the highly reliable XLS 5000 is equipped with an efficient forced-air fan to prevent excessive thermal buildup. The front panel sports dual precision-detented rotary level controls, a power switch with accompanying LED, and six additional LEDs indicating signal, clip, and fault for each channel. Rear panel connections include two electronically balanced XLR inputs as well as touch-proof binding post and...
[more info]The Q44 II power amp from Electro-Voice provides 2 x 450W @ 4 ohms or 2 x 650W @ 2 ohms. Its an excellent choice for small tops and utility loudspeakers, such as ZX1, SX Series, or EVID Series.Dynamic Headroom:Electro-Voices philosophy is that tonal performance of live music counts most; therefore, Electro-Voice amps are designed for dynamic headroom, meaning that each and every EV ampincluding the Q44 IIhas at least 30% more output capability for short-term signals when compared to a long-term sine wave value. This additional headroom results in an amp that will, for example, allow for short...
[more info]Crowns XLS 1500 amplifier is a premiere portable PA system with unmatched performance, technology and affordability. It includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. This high-performance Crown power amp provides enormous power and flexibility thanks to the integrated DriveCore Technology, PureBand Crossover System and Peakx limiters. Weighing less than 12 pounds, its much easier to set up and move from show to show. A Crown Power Amp with Integrated DriveCore Technology Class D amplifiers are notable for...
[more info]The XTi 6000 from Crown includes improved firmware and Band Manager software that simplifies DSP control and configuring. It also provides all the power you need run big subwoofers or multi-speaker stacks: 1200W per side at 8 ohms; 2100W per side at 4 ohms; and a whopping 6000W bridged mono at 4 ohms.Integrated proprietary DSP with LCD front panel display Accurate, uncolored sound with very low distortion for the best in music and voice reproduction Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads...
[more info]The American Audio VLP-1500 power amp gives you power to spare at a stunningly low price. The VLP-500 is rated at 750W RMS per channel at 4 ohms, 500W RMS per channel at 8 ohms, and 1,500W RMS bridged mono at 8 ohms. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Output Power: 750W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 500W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / 1,500W RMS @ 8 Ohms, (Bridge Mode, Mono) 1K Hz, 1% THDTotal Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms) Frequency response: (+/-01db, @rated output Power, 8 Ohms) :...
[more info]The American Audio VLP-600 power amp delivers powerful performance with unmatched economy. Pumping out 300W RMS per side at 4 ohms, 200W RMS per channel at 8 ohms, and 300W RMS bridged mono at 8 ohms, the rackmountable VLP-600 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post and Speakon outputs.Output Power: 300W RMS per channel @ 4 Ohms, 1kHz, 0.1% THD 200W RMS per channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS @ 8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less than 0.1% (20Hz - 20kHz @ 8 Ohms) Frequency response:...
[more info]The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4 TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWERs professional speaker connectors and...
[more info]The B-52 US-3000 Power Amplifier features low-noise, low-distortion circuitry and high-current output stages, toroidal transformers, and large filter capacitors to deliver super-clean, fist-pumping output even when driving 2-ohm speaker loads. Its highly reliable linear output devices provide ultra-low distortion and ruler flat frequency response. Backed by a 3-year warranty.Compact 2-rack sizeHigh-current toroidal transformers for greater 2-ohm power21-position detent gain control knobs for consistent settingsFront panel LED display: Power, bridge and parallel LEDs and signal,20dB, -10dB,...
[more info]The American Audio VLP300 power amp delivers powerful performance with unmatched economy. Pumping out 150W RMS per channel at 4 ohms, 100W RMS per channel at 8 ohms, and 300W RMS mono at 8 ohms, the rackmountable American Audio VLP300 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono) 300W RMS @ 8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms) Frequency...
[more info]This field proven amp design is the most muscular yet in the CV Series and is a perfect match for Cerwin-Vegas largest and loudest Passive Speakers and Folded Horns. A true powerhouse, the CV-5000 is capable of driving the most demanding speaker applications including Cerwin-Vegas TS-42 Folded Horn Sub. The 3 RU enclosure is compact and feature-laden, with a design that includes a high-efficiency, variable-speed fan tunnel cooling system, complete LED monitoring of the amplifiers status and comprehensive protection circuitry that guards vital components.Front Volume control that features a 21...
[more info]The GX7 professional power amplifier continues in the tradition of QSCs top-selling GX Series professional power amplifiers by offering an attractive combination of power, fidelity, configurability, long-term reliability, and overall value.At the heart of the GX7 is an all-new, advanced power supply based on the road-proven PowerLight Series technology. The result is a more overall power output in a lightweight casing compared to previous GX modelswithout any sacrifice in audio quality.At 1000W per channel at 4 ohms, the GX7 provides more than ample power to connect up to four 500W 15 2-way...
[more info]The American Audio VLP300 power amp delivers powerful performance with unmatched economy. Pumping out 150W RMS per channel at 4 ohms, 100W RMS per channel at 8 ohms, and 300W RMS mono at 8 ohms, the rackmountable American Audio VLP300 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono) 300W RMS @ 8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms) Frequency...
[more info]The American Audio VLP300 power amp delivers powerful performance with unmatched economy. Pumping out 150W RMS per channel at 4 ohms, 100W RMS per channel at 8 ohms, and 300W RMS mono at 8 ohms, the rackmountable American Audio VLP300 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post, and Speakon outputs.Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono) 300W RMS @ 8 Ohms, 1K Hz, 1% THDTotal Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms) Frequency...
[more info]The GX7 professional power amplifier continues in the tradition of QSCs top-selling GX Series professional power amplifiers by offering an attractive combination of power, fidelity, configurability, long-term reliability, and overall value.At the heart of the GX7 is an all-new, advanced power supply based on the road-proven PowerLight Series technology. The result is a more overall power output in a lightweight casing compared to previous GX modelswithout any sacrifice in audio quality.At 1000W per channel at 4 ohms, the GX7 provides more than ample power to connect up to four 500W 15 2-way...
[more info]
